Clean Air Systems
    HOME     ABOUT US      PRODUCTS     SERVICES     FEEDBACK

     Homepage > Products > P
owder Dispensing Booths


 

 
 
  Laminar airflow - Horizontal
  Laminar airflow - Vertical
  Bio Safety Cabinets
  Air shower entry systems
  Sterile garment cabinets
  Clean Air Tent
  Positive pressure modules
  Laboratory fume hoods
  Air Curtains
  HEPA & Prefine Filters
  Cleanroom Pass Box
  Powder Dispensing Booths
  Testing & Validation
 
Powder Dispensing Booths

CleanairReverse flow - Powder Sampling / Dispensing Booth:

Powder containment booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment.

The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator's breathing zone.

Powder Sampling/Dispensing Booth

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream.

Air balancing 90% Re circulation and 10% exhaust
Cleanliness Class 100 - ISO 5 as per ISO 14644–1
Particle Retention  0.3 Micron & Above
Noise Level   65 decibel on “A” scale ± 5
Velocity 90 Feet/Minute ± 20
Differential pressure By Magnehelic Gauge 0-25 mm
Illumination By Florescent Tubes with Diffusers
Power Supply 230V single phase, 50 Hz

Powder Sampling/ Dispensing Booth

Available in:

  • Full Stainless steel construction with polished finish

  • In GI construction with oven baked PU paint finish

  • In ply-lam construction

Available in different sizes


|Home|  |About Us|  |Products|  |Services|  |Feedback|
Copyright 2004 Clean Air Systems. All rights reserved.     Website designed & hosted by www.spiderindia.com